EasyManuals Logo

Hikmicro CHEETAH LRF Series User Manual

Hikmicro CHEETAH LRF Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Digital Night Vision Monocular User Manual
22
Chapter 11 Frequently Asked Questions
11.1 Why is the monitor off?
Check whether the device is off-battery. Connect the device to power supply and turn it on to
check the monitor.
11.2 The image is not clear, how to adjust it?
Adjust the focus ring until the image is clear. Refer to section 3.1.
11.3 Capturing or recording fails. What's the problem?
Check the following items.
Whether the device is connected to your PC. Capturing or recording is disabled in this status.
Whether the storage space is full.
Whether the device is low-battery.
11.4 Why the PC cannot identify the device?
Check the following items.
Whether the device is connected to your PC with supplied USB cable.
If you use other USB cables, make sure the cable length is no longer than 1 m.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro CHEETAH LRF Series and is the answer not in the manual?

Hikmicro CHEETAH LRF Series Specifications

General IconGeneral
Sensor Resolution384 × 288
Display Resolution1024 × 768
Detection Range1800 m
Laser RangefinderYes
Waterproof RatingIP67
Frame Rate50 Hz
Pixel Interval12 μm
Laser Rangefinder Accuracy± 1 m
Protection LevelIP67
Eye Relief15 mm
DisplayOLED

Related product manuals