Hikmicro Pocket Series User Manual

Pocket Series User Manual
29
Chapter 10 Connect Device to Wi-Fi
Steps
1. Go to Settings → Connections → WLAN.
2. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed.
Figure 10-1 Wi-Fi List
3. Select the Wi-Fi to connect to. A soft keyboard is displayed.
4. Enter the password by touching the screen.
Note
● DO NOT tap space in your password, or the password may be
incorrect.
● Please tap to enter password into the password field.
5. Tap to save and connect Wi-Fi.
Result
A Wi-Fi icon shows on the main interface when the connection is
completed.

Hikmicro Pocket Series Specifications

General

Wi-Fi	Yes
Laser Pointer	Yes
Accuracy	±2°C or ±2%
Image Modes	Thermal, PIP
Battery Type	Li-ion Battery
Sensor Type	Uncooled VOx microbolometer
Spectral Range	8 to 14 μm
Resolution	384 × 288 (Pocket2)