Hikmicro Pocket Series User Manual

Pocket Series User Manual
33
Chapter 13 Maintenance
13.1 View Device Information
Go to Settings → Device Settings → Device Information to view the
device information.
13.2 Set Date and Time
Steps
1. Go to Settings → Device Settings → Time and Date.
2. Set the date and time.
3. Press to save and exit.
Note
Go to Settings → Device Settings → Display Settings to enable or
disable time and date display.
13.3 Upgrade Device
Before You Start
Please download the upgrade file from the official website
http://www.hikmicrotech.com or contact the custom service and
technical support to get the upgrade file first.
Steps
1. Connect the device to your PC with cable and open the detected disk.
2. Copy the upgrade file and paste it to the root directory of the device.
3. Disconnect the device from your PC.

Hikmicro Pocket Series Specifications

General

Wi-Fi	Yes
Laser Pointer	Yes
Accuracy	±2°C or ±2%
Image Modes	Thermal, PIP
Battery Type	Li-ion Battery
Sensor Type	Uncooled VOx microbolometer
Spectral Range	8 to 14 μm
Resolution	384 × 288 (Pocket2)