HIKVISION DS-2CC51A7N-VP User Manual

Day/Night High-definition Dome Camera·User Manual
36
36
2. Position the cursor on DETECT SENSE, set the menu button
left/right to adjust the sensitivity level.
3. Position the cursor on BLOCK DISP, set the menu button
left/right to select ENABLE.
4. Press the button to enter the setup interface of the detection
panes.
5. You can press the button once to cancel a pane. Press on the
pane again to enable the pane.
6. Long press the button to back to the previous menu.
7. Select ON to enable BLOCK DISP.
8. Move the cursor to MONITOR AREA and select ON.
9. Return to the MAIN MENU and click SAVE ALL.
10. You can find the BLOCK DISP take effect after you exit the
main menu.
MONITOR AREA
Steps:
1. After moving the cursor to MOTION DET, select ON and press
the button to enter the submenu.
2. Position the cursor on DETECT SENSE, set the menu button
left/right to adjust the sensitivity level.
3. Position the cursor on MONITOR AREA. Select OFF to disable
area motion detection. Select ON to enable area motion
detection.

HIKVISION DS-2CC51A7N-VP Specifications

General

Brand	HIKVISION
Model	DS-2CC51A7N-VP
Category	Security Camera
Language	English