Network Dome Camera·Quick Start Guide
Pendant Mounting 2.3.3
The pendant mounting bracket is not included in the package. You
need to prepare one in advance, if you adopt this mounting type.
Steps:
1. Mark the screw holes on desired mounting place.
2. Drill three screw holes for expansion bolts.
3. Route the cables and fix the pendant mounting bracket to
ceiling.
Figure 2-19 Fix Pendant Mount
4. (Optional) Insert the memory card to the camera, if your camera
supports memory card installation. Refer to Section 2.1.
5. Fix the camera to the cap of the pendant mounting bracket with
3 supplied self-tapping screws.