3.1.9 Lens
Lens is used on the device equipped with motorized lens. The can reset lens
when long zoom or focus results in blurred image. This varies according to
models.
Click to operate lens
3.1.10 Quick Set Live View
It a quick setup of PTZ, display OSD, video/audio and VCA resource on live
view page.
Steps
1.
Click to show quick setup page.
2.
Set PTZ, display OSD, video/audio and VCA resource parameters.
-
For PTZ see
Lens Parameters Adjustment .
-
For display see
Display .
-
For OSD see
OSD .
-
For audio and video see
Video and Audio .
-
For VCA see
Allocate VCA Resource .
Note
The is only supported by certain models.
3.1.11 Lens Parameters Adjustment
It is used to adjust the lens focus, zoom and iris.
Zoom
●
Click
, and the lens zooms in.
●
Click , and the lens zooms out.
Focus
●
Click , then the lens focuses far and the distant object gets clear.
●
Click , then the lens focuses near and the nearby object gets clear.
PTZ Speed
●
Slide to adjust the speed of the movement.
Network Camera User Manual
8
To Next Page
Loading...
