HIKVISION DS-2CD6425G1-20

Iris
●
When the image is too dark, click to enlarge the iris.
●
When the image is too bright, click to stop down the iris.
3.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network  In 
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1.
Go to  → Local .
2.
Set the transmission parameters as required.
Protocol
TCP
TCP ensures complete delivery of streaming data and  video quality, yet the 
transmission will be  It is suitable for the stable network environment.
UDP
UDP is suitable for the unstable network environment that does not demand high video

MULTICAST
MULTICAST is suitable for the  that there are  clients. You should set the
 address for them before 
Note
For detailed  about  refer to .
HTTP
HTTP is suitable for the  that the third-party needs to get the stream from the
device.
Play Performance
Shortest Delay
The device takes the  video image as the priority over the video 
Balanced
The device ensures both the  video image and the 
Fluent
The device takes the video  as the priority over  In poor network
environment, the device cannot ensures video  even the  is enabled.
Network Camera User Manual
9