HIKVISION DS-2CD6425G1-20 - 9.11.7 SSH; 9.12 User and Account; 9.12.1 Set User Account and Permission

Steps
Note
This  is only supported by certain camera models.
1.
Go to  → System → Maintenance → Security Audit Log .
2.
Select log types, Start Time, and End Time.
3.
Click Search.
The log  that match the search  will be displayed on the Log List.
4.
 Click Export to save the log  to your computer.
9.11.7 SSH
Secure Shell (SSH) is a cryptographic network protocol for  network services over an
unsecured network.
Go to  → System → Security → Security Service , and check Enable SSH.
The SSH  is disabled by default.

Use the  with  The security risk of device internal  leakage exists when
the  is enabled.
9.12 User and Account
9.12.1 Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant  permission to
 user levels.

To increase security of using the device on the network, please change the password of your
account regularly. Changing the password every 3 months is recommended. If the device is used in
high-risk environment, it is recommended that the password should be changed every month or
week.
Steps
1.
Go to  → System → User Management → User Management .
2.
Click Add. Enter User Name, select Level, and enter Password. Assign remote permission to
users based on needs.
Administrator
Network Camera User Manual
64