HIKVISION DS-2CD6425G1-20

5.1.3 Set NAS
Take network server as network disk to store the record  captured images, etc.
Before You Start
Get the IP address of the network disk 
Steps
1.
Go to NAS  page:  → Storage → Storage Management → Net HDD .
2.
Click HDD No.. Enter the server address and  path for the disk.
Server Address
The IP address of the network disk.
File Path
The saving path of network disk 
 Type
Select  system protocol according to the  system.
Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is
selected.
3.
Click Test to check whether the network disk is available.
4.
Click Save.
5.2 Video Recording
This part introduces the  of manual and scheduled recording, playback, and
downloading recorded 
5.2.1 Record 
This  can record video  during   periods.
Before You Start
Select Trigger Recording in event  for each record type except . See Event and
Alarm for details.
Steps
1.
Go to  → Storage → Schedule  → Record Schedule .
2.
Check Enable.
3.
Select a record type.
Note
The record type varies according to  models.
Network Camera User Manual
25