HIKVISION DS-2CD6425G1-20 - 9.8 View Open Source Software License; 9.9 Time and Date; 9.9.1 Synchronize Time Manually; 9.9.2 Set NTP Server

9.8 View Open Source  License
Go to  → System → System  → About Device , and click View Licenses.
9.9 Time and Date
You can   and date of the device by   zone,   and
Daylight Saving Time (DST).
9.9.1 Synchronize Time Manually
Steps
1.
Go to  → System → System  → Time  .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one   method.
-
Select Set Time, and manually input or select date and  from the pop-up calendar.
-
Check Sync. with computer  to synchronize the  of the device with that of the local
PC.
5.
Click Save.
9.9.2 Set NTP Server
You can use NTP server when accurate and reliable  source is required.
Before You Start
Set up a NTP server or obtain NTP server 
Steps
1.
Go to  → System → System  → Time  .
2.
Select Time Zone.
3.
Click NTP.
4.
Set Server Address, NTP Port and Interval.
Note
Server Address is NTP server IP address.
5.
Click Test to test server 
6.
Click Save.
Network Camera User Manual
59