Network Camera User Manual
116
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the local storage or network storage.
Steps:
1. Enter the Capture Settings interface: Configuration > Storage > Storage Settings >
Capture.
Capture Configuration
2. Select the desired channel number.
3. Go to Capture Schedule tab to configure the capture schedule by click-and-drag
the mouse on the time bar. You can copy the record schedule to other days by
clicking the green copy icon on the right of each time bar.
4. Click Advanced to select stream type.
Advanced Setting of Capture Schedule
5. Click Save to save the settings.
To Next Page
Loading...
