Network Camera User Manual
98
Line crossing detection function detects people, vehicle or other objects which cross
a pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Note: Line crossing detection function varies according to different camera models.
Steps:
1. Enter the Line Crossing Detection settings interface, Configuration > Event >
Smart Event > Line Crossing Detection.
2. Select the Camera No.
Line Crossing Detection
3. Check the checkbox of Enable to enable the function.
4. Select the line from the drop-down list.
5. Click Area Settings tab and click Draw Area button, and a virtual line is displayed
To Next Page
Loading...
