User Manual of E Series Network Mini PTZ camera
© Hikvision
6.1.2 Advanced Settings
Configuring SNMP Settings
Purpose:
You can use SNMP to get mini PTZ camera status and parameters related information.
Before you start:
Before setting the SNMP, please use the SNMP software and manage to receive the
mini PTZ camera information via SNMP port. By setting the Trap Address, the mini
PTZ camera can send the alarm event and exception messages to the surveillance
center.
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Network > Advanced Settings > SNMP
To Next Page
Loading...
