HIKVISION DS-2DE4A404IW-DE User Manual

User Manual of E Series Network Mini PTZ camera
© Hikvision
80
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X Settings interface:
Configuration > Network > Advanced Settings > 802.1X
Figure 6-20 802.1X Settings
3. Check the Enable IEEE 802.1X checkbox to enable it.
4. Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or the switch.
5. Click to finish the settings.
The camera reboots when you save the settings.
6. After the configuration, connect the camera to the protected network.
6.2 Configuring Video and Audio Settings
6.2.1 Configuring Video Settings
Steps:
1. Enter the Video Settings interface:
Configuration > Video/Audio > Video

HIKVISION DS-2DE4A404IW-DE Specifications

General

Brand	HIKVISION
Model	DS-2DE4A404IW-DE
Category	Security Camera
Language	English