HIKVISION DS-2DE4A404IW-DE - One-Touch Patrol; Setting; Calling a Pattern

User Manual of E Series Network Mini PTZ camera
© Hikvision
28
4.4.5 One-touch Patrol
Purpose:
One-touch patrol is an automatically created patrol. The system automatically add preset No.1 to
No.32 to the patrol path 8. You can call the one-touch patrol and the speed dome moves as the
patrol path 8 automatically.
Steps:
1. Set preset No.1 to No.32. Refer to 4.4.3 Setting / Calling a Preset for detailed information of
setting preset.
2. Call preset No. 45, and the speed dome moves as patrol path 8.
3. Click to enter the patrol settings interface and start/stop one-touch patrol, edit the
patrol time and the speed.
4. You can click of the PTZ control panel to start one-touch patrol.
Figure 4-11 Patrol Path 8
4.4.6 Setting / Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on the
pattern settings interface. There are up to 4 patterns for customizing.
Pattern function varies depending on mini PTZ camera models.
 Setting a Pattern:
Steps: