HIKVISION DS-2DP0818ZIX - Maintenance; Upgrade & Maintenance

User Manual of PanoVu Series Network Camera
96
7.2 Maintenance
7.2.1 Upgrade & Maintenance
 Rebooting the Camera
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click to remotely reboot the camera.
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click or to restore the default settings.
Note:
Clicking button will restore all the parameters to default settings including the IP
address and user information. Use this button with caution.
Figure 7-8 Restore Default Settings
 Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click to select the directory as the saving path to start exporting configuration
file.
 Importing Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click to select the local configuration file and then click to start importing
configuration file.