HIKVISION DS-2DP0818ZIX User Manual

User Manual of PanoVu Series Network Camera
77
6. You can copy the settings to other alarm outputs.
7. Click to save the settings.
6.1.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and illegal
login to the cameras.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Step 6 in Section
6.1.1 Configuring Motion Detection.
Figure 6-11 Exception Settings
3. Click to save the settings.
6.2 Smart Event Configuration
6.2.1 Detecting Audio Exception
Purpose:
When you enable this function and audio exception occurs, the alarm actions will be triggered.

HIKVISION DS-2DP0818ZIX Specifications

General

Brand	HIKVISION
Model	DS-2DP0818ZIX
Category	Security Camera
Language	English