HIKVISION DS-2DP0818ZIX - Configuring Text Overlay Settings

User Manual of PanoVu Series Network Camera
38
Figure 3-16 Adjust OSD Location
6. Click to activate above settings.
3.3.3 Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay settings interface:
Configuration > Image > OSD Settings
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to drag the red text frame Text in the live view window to adjust the text overlay
position.
5. Click .
Note:
There are up to 8 text overlays configurable.