HIKVISION DS-2DP0818ZIX - Configuring Network Settings; Basic Settings

User Manual of PanoVu Series Network Camera
13
 Display POS Information: Enable the function, feature information of the detected target is
dynamically displayed near the target in the live image.
 Image Format: The captured pictures can be saved in different format. JPEG and BMP are
available.
 Record File Settings: Set the saving path of the video files.
 Record File Size: Select the packed size of manually recorded and downloaded video files. The
size can be set to 256M, 512M or 1G.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files in
interface.
 Picture and Clip Settings: Set the saving paths of the captured pictures and clipped video files.
 Save snapshots in live view to: Set the saving path of the manually captured pictures in
interface.
 Save snapshots when playback to: Set the saving path of the captured pictures in
interface.
 Save clips to: Set the saving path of the clipped video files in interface.
Note:
You can click to change the directory for saving video files, clips and pictures.
3. Click to save the settings.
2.2 Configuring Network Settings
2.2.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over network. IPv4 and
IPv6 are both supported.
Steps:
1. Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP