User Manual of PanoVu Series Network Camera
Figure 1-6 Control Panel
2. Click Device Management to enter the Device Management interface, as shown in the figure
below.
Figure 1-7 Device Management Interface
3. Check the device status from the device list, and select an inactive device.
4. Click Activate to pop up the Activation interface.
5. Create a password and input the password in the password field, and confirm the password.
Figure 1-8 Activation Interface
6. Click OK to start activation.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (Using a minimum of 8 characters, including at least three of the
following categories: upper case letters, lower case letters, numbers, and special characters.) in
order to increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
To Next Page
Loading...
Need help?
General
