User Manual of PanoVu Series Network Camera
between that of main stream and sub stream. The default setting of
stream type is .
Click to select between and play the live video via
player Webcomponents or Quick Time. The live video is played via
webcomponents by default, and other types of players are supported for
the browser, such as MJPEG, and VLC. You are required to download and
install the player to play the live video.
Volume
Click to display the . Drag the slider to
adjust the volume.
Two-way Audio
Click and it displays . Click to enable two-way audio and
the icon turns into . Click the icon again to stop two-way audio.
Note:
Before enabling the two-way audio or recording with audio functions, set
the Stream Type to Video & Audio referring to Section 3.4.1 Configuring
Video Settings.
Click to enable digital zoom function and the icon turns into .
Then drag the mouse towards low right direction to draw a rectangle on
the image as the desired zoom. After viewing it you can click any place of
the picture to get back to normal picture.
Click on the toolbar to enter the regional exposure operation mode
and the icon turns into . Then drag the mouse to draw a rectangle on
the image as the desired exposure region.
Click on the toolbar to enter the regional focus operation mode and
the icon turns into . Then drag the mouse to draw a rectangle on the
image as the desired focus region.
PTZ Control Panel
On the live view page, click to show the PTZ control panel or click to hide it.
Descriptions of Icons on PTZ Control Panel are listed below:
Hold the direction buttons to control the pan/tilt movements.
Click and the camera keeps panning, the icon turns into . Click the
To Next Page
Loading...
Need help?
General
