HIKVISION DS-3E1X05P Series - Chapter 4 Powering on the Device

Chapter 4 Powering on the Device
Please use the aached power cord in package to power on the device.
Before powering your switch, make sure that:
• The
operang power supply is compliant with rated input standard.
• Port cables and grounding cables are correctly connected.
• If there is outdoor cabling, connect a lightning rod and lightening arrester to the cable.
Cauon
PoE power supply line and strong wire cannot be wired together, otherwise PD equipment or
switch ports will be burnt.
100 Mbps PoE Switch Quick Start Guide
9