HIKVISION DS-7100HGHI-K1/R Series - Chapter 2 Live View; GUI Introduction

Chapter 2 Live View
2.1 GUI Introducon
• Click to start/stop auto-switch. The screen will automacally switch to the next one.
• Click
to start/stop all-day recording.
• Right click a camera, or click
to enter full screen mode.
• Double click a camera to view it in single-screen mode. Double click again to exit single-screen
mode.
• Change a camera live view screen by dragging it from its screen to the desired screen.
• Scroll up/down to turn to previous/next screen.
•
Posion the cursor on a camera to show shortcut menu.
Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Descripon
Buon Descripon
Start playing videos recorded in the latest ve minutes.
Start/stop manual recording.
Turn on/o live view audio.
Digital zoom. You can adjust zoom-in mes and view the desired area.
Click it to enter PTZ control mode.
• In the live view interface, there are icons at the upper-right corner of the screen for each
camera, showing the camera recording and alarm status.
Table 2-2 Live View Icon
Descripon
Icon Descripon
Alarming (normal event and smart event).
Recording.
Digital Video Recorder User Manual
5