HIKVISION DS-7100HGHI-K1/R Series

Sudden Scene Change
Scene change funcon detects the change of surveillance environment aected by the external
factors; such as the
intenonal rotaon of the camera and some certain acons can be taken when
the alarm is triggered.
Steps
1. Go to
Conguraon → Event → Smart Event → Audio Excepon .
2. Select Camera to
congure.
3. Check Save VCA Picture to save the captured pictures of VCA detecon.
4. Check Enable.
5. Adjust Sensivity. The Sensivity in the Rule Sengs ranges from 1 to 100, and the higher the
value is, the more easily the change of scene can trigger the alarm.
Note
For the analog cameras, the line crossing detecon and intrusion detecon conict with sudden
scene change detecon. When sudden scene change detecon is on, neither line crossing
detecon nor intrusion detecon can be enabled.
6. Set the arming schedule.
7. Set the linkage
acons.
8. Click Apply.
6.4.3
Congure Arming Schedule
Steps
1. Click Arming Schedule.
2. Choose one day of a week and set the
me segment. Up to eight me periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Digital Video Recorder User Manual
65