HIKVISION DS-7100HGHI-K1/R Series

Chapter 7 Maintenance
7.1 Restore Default
Steps
1. Go to Maintenance .
2. Select the restoring type.
Simple Restore
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to
the factory default
sengs.
Factory Defaults
Restore all parameters to the factory default sengs.
Restore to Inacve
Restore the device to the inacve status, and leave all sengs unchanged except restoring
user accounts.
3. Click Yes. The device will reboot automacally.
7.2 Search Log
The operaon, alarm, excepon and informaon of video recorder can be stored in logs, which can
be viewed and exported at any
me.
Steps
1. Go to Maintenance → More .
2. Set the search
condions.
3. Click Search.
7.3 Upgrade
Warning
Do not shutdown or turn o the power during upgrade.
7.3.1 Local Upgrade
Before You Start
Store the upgrade rmware to a backup device, and connect it to your device.
Digital Video Recorder User Manual
78