HIKVISION DS-7100HGHI-K1/R Series

6.2.5 Hik-Connect
Go to Conguraon → Network → Plaorm Access . Refer to Hik-Connect for details.
6.2.6 Advanced Sengs
Steps
1. Go to
Conguraon → Network → Advanced Sengs .
2.
Congure the parameters as your desire.
RTSP
You can specically secure the stream data of live view by seng the RTSP authencaon.
RTSP Authencaon Type
Two authencaon types are selectable, if you select digest, only the request with digest
authencaon can access the video stream by the RTSP protocol via the IP address. For
security reasons, it is recommended to select digest as the authencaon type.
ISAPA
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the communicaon between the system devices (e.g., network camera,
NVR, etc.). The video recorder is as a server, the system can
nd and connect the video
recorder.
HTTP
The admin user account can disable the HTTP service from the GUI or the web browser. Aer
the HTTP is disabled, all the related services, including the ISAPI, Onvif and Gennetc, will
terminate as well.
HTTP Authencaon
If you need to enable the HTTP service, you can set the HTTP authencaon to enhance the
access security. Two
authencaon types are selectable, for security reasons, it is
recommended to select digest as the authencaon type.
IP Camera Occupaon Detecon
The funcon detects the network camera status. If the network camera has been added by
another video recorder, the network camera status will show as
in Online Device list.
3. Click Apply.
Digital Video Recorder User Manual
43