HIKVISION DS-7100HGHI-K1/R Series

If the DHCP server is available, you can check Enable DHCP to automacally obtain an IP
address and other network sengs from that server.
Obtain DNS Automacally
If DHCP is checked. You can check Obtain DNS Automacally to automacally obtain
Preferred DNS Server and Alternate DNS Server.
3. Click Apply.
5.2.2 Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
connected devices, which enables you to get a convenient remote access to the surveillance
system.
Steps
1. Go to
Conguraon → Network → Hik-Connect .
2. Check Enable. The service terms will pop up.
1) Scan the QR code to read the service terms and privacy statement.
2) Check I have read and agree to Service Terms and Privacy Statement. if you agree with the
service terms and privacy statement.
3) Click OK.
3.
Oponal: Check Stream Encrypon. It requires to enter vericaon code in remote access and
live view aer this funcon is enabled.
4.
Oponal: Check Custom, and edit Server Address.
5. Enter a code in Vericaon Code. You can click Refresh to randomly generate a vericaon
code.
6. Bind your device with a Hik-Connect account.
1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also
download it from
hps://appstore.hikvision.com , or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.
Figure 5-5 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Digital Video Recorder User Manual
21