HIKVISION DS-7100HGHI-K1/R Series

Steps
1. Go to
Conguraon → Camera → IP Camera .
2. Click
.
3. Set network camera parameters, including IP address, protocol, management port, etc. You can
check Use IPC Acve Password to use the device password to add network camera(s).
4.
Oponal: Click Add More to add another network camera.
5. Click OK.
Figure 5-10 Add Network Camera
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Conguraon → Camera → IP Camera .
2. Click to edit the selected camera.
Channel Port
If the connected device is an encoding device with
mulple channels, you can select the
channel port No. to choose a connecng channel.
3. Click OK.
5.3.3 OSD
Sengs
Congure OSD (On-Screen Display) sengs for the camera, including date format, camera name,
etc.
Steps
1. Go to Conguraon → Camera → OSD .
2. Select a camera.
Digital Video Recorder User Manual
26