Figure 2-3 PTZ Parameter
3. Set the PTZ camera parameters.
Note
• All parameters should be the same as the PTZ camera.
• For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC
(Coaxitron). Ensure the selected protocol is supported by the connected camera/dome.
• The AHD and HDCVI cameras support coaxitron control.
•
Selecng Coaxitron protocol will make other parameters unavailable, including baud rate,
data bit, stop bit, parity and ow control.
4. Click OK.
Digital Video Recorder User Manual
7
To Next Page
Loading...
