User Manual of DS-7200-ST Series DVR
81
Configuring PPPOE Settings
Your DVR also allows for Point-to-Point Protocol over Ethernet (PPPOE) access. To set up PPPOE access:
1. Click Menu > Settings > Network to enter the Network Settings menu.
2. Select the General tab, as shown in Figure 3.
Figure 3. Network Settings Menu
3. Select the Advanced tab to enter the Advanced Network Settings menu, shown in Figure 4.
Figure 4. Advanced Network Settings
4. Click the Set button beside PPPOE to enter PPPoE Settings menu, shown in Figure 5.
To Next Page
Loading...
