HIKVISION DS-7200-ST Series

User Manual of DS-7200-ST Series DVR
87
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
To configure the Email settings:
1. Click Menu > Settings > Network to enter the Network Settings menu.
2. Select the Advanced tab.
3. Click the Set button next to Email to enter the Email settings menu.
Figure 12. Host/Others Menu
4. Configure the following Email settings:
Server Authentication (optional): Check the checkbox to enable the server authentication
feature.
User Name: The user account of sender’s Email for SMTP server authentication.
Password: The password of sender’s Email for SMTP server authentication.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
From Name: The name of sender.
From Email Address: The Email address of sender.
Select Recipients: Select the receiver. Up to 3 receivers can be configured.
To Name: The name of user to be notified.
To Email Address: The Email address of user to be notified.
5. Click the Apply button to save the Email settings.
alarm shop