EasyManuals Logo

HIKVISION DS-7332HQHI-K4 User Manual

HIKVISION DS-7332HQHI-K4
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
Network Video Recorder User Manual
99
Configure Redundant Recording and Capture
Purpose:
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data
safety and reliability.
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed information, please refer to Chapter 7.2.1 Configure HDD Group. There should be at
least another HDD which is in Read/Write status.
Go to Storage > Storage Device.
Select a HDD from the list and Click to enter the Local HDD Settings interface.
Set the HDD property to Redundancy.
HDD Property-Redundancy
Go to Storage > Schedule Settings > Record Schedule/Capture Schedule.
Click Advanced to set the camera recording parameters.

Table of Contents

Other manuals for HIKVISION DS-7332HQHI-K4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7332HQHI-K4 and is the answer not in the manual?

HIKVISION DS-7332HQHI-K4 Specifications

General IconGeneral
Bit rate64 Kbit/s
Product colorBlack
Remote viewingYes
Maximum frame rate30 fps
Audio formats supportedG.711 μ-law
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels16 channels
Audio input5
BNC input ports32
BNC output ports1
Alarm input channels16
Video input channels32 channels
Alarm output channels4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of users128 user(s)
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSerial ATA
Maximum HDD capacity10000 GB
AC input voltage100 - 240 V
Power supply typeAC
Power consumption (max)74 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth390 mm
Width440 mm
Height70 mm
Weight7000 g

Related product manuals