Network Video Recorder User Manual
196
In the Add User interface, enter the information for new user, including User Name,
Password, Confirm (password), User Level (Operator/Guest) and User’s MAC Address.
Strong Password recommended–We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
User Level: Set the user level to Operator or Guest. Different user levels have different
operating permission.
Operator: The Operator user level has permission of Two-way Audio in Remote
Configuration and all operating permission in Camera Configuration by default.
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and
only has the local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC which logs onto the device. If it is
configured and enabled, it only allows the remote user with this MAC address to access the
device.
Click OK to finish the new user account adding.
Result: In the User Management interface, the added new user is displayed on the list.
User List
Set Permission for a User
Purpose:
For the added user, you can assign the different permissions, including the local and remote
operation for the device.
Go to System > User.
Select a user from the list and then click the button to enter the permission
settings interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
