HIKVISION DS-7332HQHI-K4 User Manual

Network Video Recorder User Manual
194
Configure DST Settings
Purpose:
The DST (daylight saving time) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard time (ST).
Go to System > General.
Check Enable DST.
DST Settings Interface
Select the DST mode to Auto or Manual.
 Auto: Automatically enable the default DST period according to the local DST rules.
 Manual: Manually set the start time and end time of the DST period, and the DST bias.
 DST Bias: Set the time (30/60/90/120 minutes) offset from the standard time.
 Example: The DST begins at 2:00 a.m. on the second Sunday of March and ends at 2:00
a.m. on the first Sunday of November, with 60 minutes ahead.
Click the Apply button to save the settings.
Configure Enhanced IP Mode
Check Enhanced IP Mode.
Enabling Enhanced IP Mode will allow you to connect to the maximum number of cameras and
make Smart Event unavailable in analog channel.
This function is only available for iDS-7200HQHI-K/S and iDS-7200HUHI-K/S series.

HIKVISION DS-7332HQHI-K4 Specifications

General

Bit rate	64 Kbit/s
Product color	Black
Remote viewing	Yes
Maximum frame rate	30 fps
Audio formats supported	G.711 μ-law
Maximum video resolution	3840 x 2160 pixels
Video compression formats	H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels	16 channels
Audio input	5
BNC input ports	32
BNC output ports	1
Alarm input channels	16
Video input channels	32 channels
Alarm output channels	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of users	128 user(s)
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	Serial ATA
Maximum HDD capacity	10000 GB
AC input voltage	100 - 240 V
Power supply type	AC
Power consumption (max)	74 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	390 mm
Width	440 mm
Height	70 mm
Weight	7000 g