EasyManuals Logo

HIKVISION DS-7332HQHI-K4 User Manual

HIKVISION DS-7332HQHI-K4
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Network Video Recorder User Manual
190
Check Enable ONVIF to enable the ONVIF access management.
Click Add to enter the Add User interface.
Add User
Edit the user name, and enter the strong password.
Select the user level to Media User, Operator and Admin.
Click OK to save the settings.
Result:
The added user accounts have the permission to connect other devices to the device via ONVIF
protocol.
ONVIF protocol is disabled by default.
Managing IP Camera Activation
Purpose:
When you activate the device for the first-time access, you can set the activation password for the
IP camera (s) as well. Refer to Chapter 2.2 Activate the Device. And you can also manage the
password to enhance the security.
Go to System > System Service > IP Camera Activation.
Check the Change Password to enable the permission.

Table of Contents

Other manuals for HIKVISION DS-7332HQHI-K4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7332HQHI-K4 and is the answer not in the manual?

HIKVISION DS-7332HQHI-K4 Specifications

General IconGeneral
Bit rate64 Kbit/s
Product colorBlack
Remote viewingYes
Maximum frame rate30 fps
Audio formats supportedG.711 μ-law
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels16 channels
Audio input5
BNC input ports32
BNC output ports1
Alarm input channels16
Video input channels32 channels
Alarm output channels4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of users128 user(s)
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSerial ATA
Maximum HDD capacity10000 GB
AC input voltage100 - 240 V
Power supply typeAC
Power consumption (max)74 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth390 mm
Width440 mm
Height70 mm
Weight7000 g

Related product manuals