HIKVISION DS-7332HQHI-K4 User Manual

Network Video Recorder User Manual
141
Sniff Settings
Configure POS Text Overlay
Go to System > POS Settings.
Click Channel Linkage and Display tab.
Select the linked channel to overlay the POS characters.
Set the characters overlay for the enabled POS.
 Character encoding format: currently the Latin-1 format is available.
 Overlay mode of the characters to display in scrolling or page mode.
 Font size and font color.
 Display time (sec) of the characters. The value ranges 5 -3600 sec.
 Timeout of POS event. The value ranges 5 -3600 sec. When the device has not received the
POS message over the defined time, the transaction is finished.
In the Privacy Settings, set the POS privacy information to not display on the image,
e.g., the card number, or the user name, etc.
Result: The defined privacy information will be displayed in ***on the image instead.
(optional) Check the checkbox to enable the Overlay POS in Live View. When this
feature is enabled, the POS information can be overlain on the live view image.

HIKVISION DS-7332HQHI-K4 Specifications

General

Bit rate	64 Kbit/s
Product color	Black
Remote viewing	Yes
Maximum frame rate	30 fps
Audio formats supported	G.711 μ-law
Maximum video resolution	3840 x 2160 pixels
Video compression formats	H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels	16 channels
Audio input	5
BNC input ports	32
BNC output ports	1
Alarm input channels	16
Video input channels	32 channels
Alarm output channels	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of users	128 user(s)
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-connect Cloud P2P, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	Serial ATA
Maximum HDD capacity	10000 GB
AC input voltage	100 - 240 V
Power supply type	AC
Power consumption (max)	74 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	390 mm
Width	440 mm
Height	70 mm
Weight	7000 g