HIKVISION DS-7604NI-VP User Manual

User Manual of Network Video Recorder
186
13.2 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu >
Configuration > General interface.
Steps:
1. Enter the General Settings interface.
Menu >Configuration> General
2. Select the General tab.
Figure 13. 2 General Settings Interface
3. Configure the following settings:
• Language: The default language used is English.
• Resolution: Select the resolution for the video output, which must be the same with the resolution of the
monitor screen.
• Time Zone: Select the time zone.
• Date Format: Select the date format.
• System Date: Select the system date.
• System Time: Select the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable Password: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.

HIKVISION DS-7604NI-VP Specifications

General

Model	DS-7604NI-VP
Channel Input	4
IP Video Input	4
Synchronous Playback	4-ch
USB Interface	2 × USB2.0
Consumption(without HDD)	≤ 10W
Type	NVR
Video Output	HDMI, VGA
Hard Drive Bays	1
Storage	1 SATA interface
Network Interface	1 x 10/100/1000Mbps
Two-way Audio Input	1-ch
Power Supply	12 VDC
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
VGA Output Resolution	1920 × 1080 /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz
Recording Resolution	8MP (3840 × 2160)
Live View / Playback Resolution	8MP (3840 × 2160)