HIKVISION DS-7604NI-VP User Manual

User Manual of Network Video Recorder
46
Figure 2. 32 Edit IP Camera Interface - Manual
2.5.5 Checking the PoE Information
This section is only applicable to DS-7600NI-SE/P models.
Steps:
1. Enter the Camera Management interface.
Menu > Camera > Camera
2. Click the PoE Information tab to view the PoE status.
Figure 2. 33 PoE Information Interface
3. You can see the PoE connection status: the connected PoE port is displayed as , and the disconnected one
is displayed as . Besides, the power cunsumption of each port and all ports are also be clearly displayed.

HIKVISION DS-7604NI-VP Specifications

General

Model	DS-7604NI-VP
Channel Input	4
IP Video Input	4
Synchronous Playback	4-ch
USB Interface	2 × USB2.0
Consumption(without HDD)	≤ 10W
Type	NVR
Video Output	HDMI, VGA
Hard Drive Bays	1
Storage	1 SATA interface
Network Interface	1 x 10/100/1000Mbps
Two-way Audio Input	1-ch
Power Supply	12 VDC
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
VGA Output Resolution	1920 × 1080 /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz
Recording Resolution	8MP (3840 × 2160)
Live View / Playback Resolution	8MP (3840 × 2160)