HIKVISION DS-7604NI-VP User Manual

User Manual of Network Video Recorder
188
13.4 Configuring More Settings for Device
Parameters
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 4.
Figure 13. 4 More Settings Interface
3. Configure the following settings:
• Device Name: Edit the name of NVR.
• Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and the
default No. is 255. The number is used for the remote and keyboard control.
• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes, then
the system will exit from the current operation menu to live view screen after 5 minutes of menu
inactivity.
• Menu Output Mode: You can choose the menu display on different video output. By default, only
HDMI
TM
/VGA is selectable.
4. Click the Apply button to save the settings.

HIKVISION DS-7604NI-VP Specifications

General

Model	DS-7604NI-VP
Channel Input	4
IP Video Input	4
Synchronous Playback	4-ch
USB Interface	2 × USB2.0
Consumption(without HDD)	≤ 10W
Type	NVR
Video Output	HDMI, VGA
Hard Drive Bays	1
Storage	1 SATA interface
Network Interface	1 x 10/100/1000Mbps
Two-way Audio Input	1-ch
Power Supply	12 VDC
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
VGA Output Resolution	1920 × 1080 /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz
Recording Resolution	8MP (3840 × 2160)
Live View / Playback Resolution	8MP (3840 × 2160)