83
Configure System Settings
Configuring General Settings
General settings such as the system language can be configured in the General Settings menu of your DVR.
To configure general settings:
1. Click Menu > Settings > General to enter the General Settings menu, shown in Figure 1.
Figure1. General Settings Menu
2. Select the General tab.
3. Configure general settings, including:
• Language: Default language used in DVR menus.
• CVBS Output Standard: Video output standard: NTSC and PAL.
• VGA Resolution: VGA output resolution.
• Time Zone: Time zone to use for DVR.
• Menu Date Format: Format for date.
• System Time: System time and date.
• Mouse Pointer Speed: Speed of mouse pointer.
• Enable Password: Enable/disable system password.
Note: If the video standard is different between the input and the output, you may notice flickering in Live View
mode.
Configuring Advanced Settings
To configure more advanced settings:
1. Click Menu > Settings > General to enter the General Settings menu, shown in Figure 1.
2. Click the More Settings tab to enter the More Settings menu, shown in Figure 2.
To Next Page
Loading...
