HIKVISION DS-E00HGHI-D Series - Display Settings

The informaon of added network camera can be generated into an excel le and exported to
the local device for backup, including the IP address, port, password of admin, etc. And the
exported le can be edited on your computer, like adding or deleng the content, and
copying the
sengs to other devices by imporng the excel le to it.
Protocol
To connect the network cameras which are not congured with the standard protocols, you
can
congure the customized protocols for them. The system provides 16 customized
protocols.
Camera Acvaon Password Sengs
Change the default password for acvang and adding network cameras. For network
cameras that are already connected, you can choose to change their passwords to this one in
the following pup-up window.
Batch
Conguraon
The device can enable SVC funcon or automacally synchronize me of the selected
network cameras.
Plug-and-Play
The device can add network camera automacally.
6.3.3 Display
Sengs
Congure the OSD (On-Screen Display), image sengs, exposure sengs, day/night switch
sengs, etc.
Steps
1.
Go to
Conguraon → Camera → Display .
2.
Set Camera.
3.
Congure parameters as your desire.
OSD
Sengs
Congure the OSD (On-screen Display) sengs for the camera, including date, me, camera
name, etc.
Image Sengs
Customize the image parameters including the brightness, contrast, and saturaon for the
live view and recording
eect.
Exposure
Set the camera exposure me (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
The camera can be set to day, night, auto or scheduled switch mode according to the
surrounding
illuminaon condions or me schedule.
Digital Video Recorder User Manual
54