Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
8. Oponal: Check Import to Group to create a group by the device name.
Note
You can import all the channels of the device to the corresponding group by default.
9. Click OK t
o add the device.
Add Mulple Online Devices
You can add mulple online devices to the client soware.
Steps
1. En
ter the Device Management module.
2. Click
on the right of De
vice Management and select Device.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Select mulple devices.
Note
For the inacve
device, you need to create the password for it before you can add the device
properly. For detailed steps, refer to Acvaon .
5. Click Add t
o open the device adding window.
6. Enter the required informaon.
User Name
B
y default, the user name is admin.
Password
DS-K1T341A Series Face
Recognion Terminal User Manual
90
To Next Page
Loading...
Need help?
General
