HIKVISION DS-K1T341AMF - 9.6 Set Access Group to Assign Access Authorization to Persons

9.4.3 Issue a Card by Local Mode
If a card enrollment staon is available, you can issue a card by local mode. To read the card
number, you should connect the card enrollment staon to the PC running the client by USB
in
terface or COM, and place the card on the card enrollment staon.
Steps
1. En
ter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add to enter Add
Person panel.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the
Credenal → Card area, click +.
4. Click Sengs to enter the Sengs page.
5. Select Local as the card issuing mode.
Figure 9-3 Issue a Card by Local Mode
6. Se
t other related parameters.
DS-K1T341A Series Face Recognion Terminal User Manual
101