HIKVISION DS-K1T341AMF - Set DST; View Open Source Software License

Figure 8-2 Time Sengs
Click Sa
ve to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
8.5.4 Set DST
Steps
1. Click Conguraon → System → System Sengs → DST .
Figure 8-3 DST Page
2. Check Enable DS
T.
3. Set the DST start me, end me and bias me.
4. Click Sa
ve to save the sengs.
8.5.5 View Open Source Soware License
Go to Conguraon → System → System Sengs → About Device , and click View Licenses to
view the device license.
DS-K1T341A Series Face Recognion Terminal User Manual
62