HIKVISION DS-K1T341AMF User Manual

The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
10. Tap to save the
sengs.
7.3.3 Add Card
Add a card for the user and the user can authencate via the added card.
Steps
Note
Up to 3,000 cards can be added.
1. Long t
ap on the inial page for 3 s and slide to the le/right by following the gesture and log in
the backend.
2. Tap User → + to enter the Add User page.
3. Connect an external card reader according to the wiring diagram.
4. Tap the Employee ID. eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
5. T
ap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• The suggested user name should be within 32 characters.
6. T
ap the Card eld and tap +.
7. Congure the card No.
-
Enter the card No. manually.
-
Present the card over the card presenng area to get the card No.
Note
• The card No. cannot be empty.
•
Up to 20 characters are allowed in the card No.
• The card No. cannot be duplicated.
DS-K1T341A Series Face Recognion Terminal User Manual
36

HIKVISION DS-K1T341AMF Specifications

General

Model	DS-K1T341AMF
Category	Touch terminals
Operating System	Linux
Resolution	480 × 272
WDR	Yes
Face Capacity	3000
Event Capacity	100, 000
Communication Mode	TCP/IP, Wi-Fi
Working Temperature	-10°C to 55°C
RAM	512 MB
Screen Type	LCD
Camera	2 MP
Face Recognition Distance	0.3 m to 1.5 m
Face Recognition Accuracy	99%
Face Recognition Duration	< 0.2 s
Power Supply	12 VDC/2 A
Working Humidity	10% to 90%
Screen Size	4.3 inch