HIKVISION DS-K1T341AMF User Manual

3. In the Auto-Arming column, turn on the switch to enable auto-arming.
Figure 9-14 Arm Device
Aer turned on, the device(s) will be armed. And nocaons about the events triggered by the
armed de
vice(s) will be automacally sent to the client soware in real-me.
9.10.2 View Real-Time Events
The real-me event informaon received by the client of the connected resources are displayed.
You can check the real-me event informaon, including event source, event me, priority, etc.
Be
fore You Start
Enable receiving events from devices before the client can receive event from the device, see
Enable Receiving Event from Devices for details.
Steps
1. Click Event Center → Real-me Event t
o enter the real-me event page and you can view the
real-me events received by the client.
Event Time
For encoding device, event me is the client me when it receives the event. For other
de
vice types, event me is the me when the event is triggered.
Priority
Priority represents the emergency degree of the event.
2. Filter the events.
Filter by Device Type and (or)
Priority
Select device type(s) and (or) priories to lter
events.
Filter by Keywords Enter the keywords to lter the events.
DS-K1T341A Series Face
Recognion Terminal User Manual
146

HIKVISION DS-K1T341AMF Specifications

General

Model	DS-K1T341AMF
Category	Touch terminals
Operating System	Linux
Resolution	480 × 272
WDR	Yes
Face Capacity	3000
Event Capacity	100, 000
Communication Mode	TCP/IP, Wi-Fi
Working Temperature	-10°C to 55°C
RAM	512 MB
Screen Type	LCD
Camera	2 MP
Face Recognition Distance	0.3 m to 1.5 m
Face Recognition Accuracy	99%
Face Recognition Duration	< 0.2 s
Power Supply	12 VDC/2 A
Working Humidity	10% to 90%
Screen Size	4.3 inch