HIKVISION DS-K1T341AMF User Manual

Set the device installed oor No.
Door Staon No.
Set the device installed oor No.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
If set the device type as Outer Door Staon, you can set the period No., outer door staon No.,
and community No.
Period No.
Set the device installed period No.
Outer Door Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Community No.
Se
t the device installed community No.
8.5.19 Access Control Sengs
Set Authencaon Parameters
Click Conguraon → Access Con
trol → Authencaon Sengs .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
Click Sa
ve to save the sengs aer the conguraon.
Device Type
Select Main Card Reader or Sub Card Reader from the drop-down list.
Main Card Reader
You can congure
the device card reader's parameters.
Sub Card Reader
You can congure the connected peripheral card reader's parameters.
DS-K1T341A Series Face Recognion Terminal User Manual
77

HIKVISION DS-K1T341AMF Specifications

General

Model	DS-K1T341AMF
Category	Touch terminals
Operating System	Linux
Resolution	480 × 272
WDR	Yes
Face Capacity	3000
Event Capacity	100, 000
Communication Mode	TCP/IP, Wi-Fi
Working Temperature	-10°C to 55°C
RAM	512 MB
Screen Type	LCD
Camera	2 MP
Face Recognition Distance	0.3 m to 1.5 m
Face Recognition Accuracy	99%
Face Recognition Duration	< 0.2 s
Power Supply	12 VDC/2 A
Working Humidity	10% to 90%
Screen Size	4.3 inch