HIKVISION DS-K1T341AMF User Manual

Before You Start
• You should add organizaons and persons in Person module and the persons has swiped card.
F
or details, refer to Person Management .
• Calculate the aendance data.
Note
• The client will automacally calculate the previous day's aendance data at 1:00 am on the
ne
xt day.
• Keep the client running at 1:00 am or it cannot calculate the previous day's aendance data
automacally. If not calculated automacally, you can calculate the aendance data manually.
For details, refer to Manually Calculate Aendance Data .
Steps
1. En
ter the Time & Aendance module.
2. Click Aendance Stascs → Original Records .
3. Set the aendance start me and end me that you want to search from.
4. Set other search condions, such as department, person name, and employee No.
5. Oponal: Click Get from Device to get the aendance data from the device.
6. Oponal: Click Reset to reset all search condions and edit the search condions again.
7. Click Search.
The result displays on the page. You can view the employee's required aendance status and
check point.
8. Oponal:
Aer searching the result, perform one of the following operaons.
Generate Report Click R
eport to generate the aendance report.
Export Report Click Export t
o export the results to the local PC.
Generate Instant Report
It supports to generate the a series of aendance reports manually to view the employees'
aendance results.
Before You Start
Calculate the aendance data.
Note
You can calculate the aendance data manually, or set the schedule so that the client can calculate
the da
ta automacally every day. For details, refer to Calculate Aendance Data .
Steps
1. En
ter the Time & Aendance module.
2. Click Aendance Stascs → Report .
3. Select a report type.
DS-K1T341A Series Face Recognion Terminal User Manual
169

HIKVISION DS-K1T341AMF Specifications

General

Model	DS-K1T341AMF
Category	Touch terminals
Operating System	Linux
Resolution	480 × 272
WDR	Yes
Face Capacity	3000
Event Capacity	100, 000
Communication Mode	TCP/IP, Wi-Fi
Working Temperature	-10°C to 55°C
RAM	512 MB
Screen Type	LCD
Camera	2 MP
Face Recognition Distance	0.3 m to 1.5 m
Face Recognition Accuracy	99%
Face Recognition Duration	< 0.2 s
Power Supply	12 VDC/2 A
Working Humidity	10% to 90%
Screen Size	4.3 inch