HIKVISION DS-K1T604M - User Management; Adding User

Face Recognition Terminal User Manual
31
2. Edit the time parameters.
Parameter
Description
Time:
Set the time which will be displayed on the device screen.
DST:
Enable or disable the DST function. If enabling the DST function, you can set
the DST start time, end time, and the bias time.
Start Time: Set the DST start time.
End Time: Set the DST end time.
Bias Time: Set the DST bias time when the DST starts.
3. Tap to save the settings and go back to the Home page.
5.4 User Management
Purpose:
On the user management interface, you can add, edit, delete and search the user.
Tap User on the Home page to enter the User Management page.
5.4.1 Adding User
Purpose:
On the Add User page, you can add users, including the employee No., name, card No. You can also
link the fingerprint, the face picture to the user, or set password, authentication mode, schedule