HIKVISION DS-K1T604M - Setting Time

Face Recognition Terminal User Manual
30
Parameter
Description
Security Level :
You can select the fingerprint security level.
The higher is the security level, the lower is the false acceptance rate (FAR).
The higher is the security level, the higher is the false rejection rate (FRR).
Upgrading Firmware
On the Upgrade page, plug in the USB disk and tap Start. The device will automatically read the
upgrading file in the USB disk and upgrade the firmware.
Note:
 The upgrading file should be in the root directory.
 The upgrading file name should be digicap.dav.
5.3.3 Setting Time
Purpose:
You can set the device time and the DST in this section.
Steps:
1. Tap Time (Time Settings) on the Home page to enter the Time Settings page.